3 Easy Steps on Removing Wax from a Surfboard: [2023]

Last Updated January 27, 2023

Let’s start with the essential question: how to remove wax from a surfboard? There are several types of surf wax in the market. They can be classified as either Warm, Tropical, Cool, and Cold. The water temperature of your surf spot will determine which type you should choose. 

Removing wax from your surfboard is easier than other people think. However, it can be really messy, so you must get some old newspaper or plastic first before proceeding.

Every surfer wants his surf wax to be as gooey as possible. However, removing it might be a little tricky, especially when it’s your first time to remove wax from your surfboard.

With this article, you can surely solve your dilemma and make your board look new again.

How to Remove Wax from a Surfboard

Removing an old wax tends to be time-consuming and a filthy task, but in this article, there are some useful ways to help you get rid of that wax coat.

#1. Prepare all the needed materials.

To easily remove the wax from your surfboard, you must know and have all the required materials. In the same way, one of the best ways to soften the wax is to leave your surfboard under the hot sun for ten to fifteen minutes.

If the current weather cannot soften your board’s wax, you have to use the blow-dryer. You must blow-dry a particular area first before proceeding to other areas. Pouring hot water can also help you soften the wax. However, do not keep your surfboard out for too long. Too much heat can damage your board from inside out.

After you soften the wax, take your wax comb, old credit card, or any similar object to scrape the wax carefully from your board. If you notice that it does not come off quickly, blow dry it again. If the wax is soft enough, you can continue scraping and use the curved edge of your wax comb to remove the wax on your board’s rails.

#2. Continue rubbing until every bit of wax is removed.

You can also buy some products in the market that will help you remove the remaining wax.  You will rub it on your board after scraping. However, some surfers said that melted coconut oil could achieve the same job.

Another tool that you can use is the Pickle Wax Remover. It is a chemical-free and saw-dust type of powder that works effectively to rub any waxy residue off your board. This is one of the ideal products to consider when removing old wax.

Another product that you can also use is “magic dust”. It is a foam dust that is found in vacuum systems and shaping days. If you live near a surfboard manufacturer, this is a piece of excellent news for you. All you have to do is to bring a large zip lock on their factory and ask for some. If you live away from any surfboard manufacturer, a good alternative is a sawdust.

After scraping, you can use this dust and rub it around your board. You can keep on sprinkling and wiping the wax until your board looks polished.

#3. Do the final clean-up.

You can use acetone or plain flour to achieve a wax-free shiny look.  Just dab your paper towel in acetone and rub it on your board. If you are using flour, just spread it all over your board and disperse it properly.

Why Do You Need to Remove and Replace Your Surf Wax Regularly?

#1. It improves your grip.

A fresh wax coat is way better than that two-year-old wax job. You won’t regret it – that’s for sure.

#2. You can identify the necessary fixes.

Cleaning your board will help you notice some dents and damage to it. You can also check if there is a crack that needs repair. If you left this crack unchecked, it could increase the damage on your board. Therefore, leaving your old wax on your board is not a good idea.

Expert Tips

  • Another thing that you need to consider before removing the wax is to place your surfboard in the right place. It is better to have your removal session outside like in the yard, so you’ll have adequate space to work on your board.

Place some newspaper or cardboard and start the process. When you do this outside, the disposal will be a whole lot easier. Additionally, wax bits are hard to remove from furniture and rugs. Therefore, it is not recommended to do this entire process indoors.

  • If you intend to travel with your surfboard, make sure to clean off your board’s wax. If you have a cold water wax, there’s a tendency of wax melting in your bag or the water.
  • Do not use any sharp objects in scraping your board. Avoid using scissors, a knife, or even a kitchen scraper.
  • Do not use boiling water on your board since it might ruin it. Some hot or warm water is enough.
  • If you are going to use any solvent to clean the wax, make sure that it’s safe to use on your board.
  • Make time to clean your surfboard and apply a new coat regularly. It will help you maintain your grip while surfing and avoid slipping.

Frequently Asked Questions

Q: Is it okay to apply wax without removing the old one?

A: No. Most surfers think that it’s okay to add a new coat of wax instead of removing the old one first. When you layer multiple waxes on your board, there is a possibility that your wax will not do its job very well. When you do not remove your old wax before applying the new one, the new wax will flake off while you are using your board in the water.

Another thing is that the wax will smear around. You will have a hard time keeping your feet in the right position on the board.

Q: What will happen if I don’t apply surf wax on my board?

A: The surf wax does an excellent job in helping surfer maintain their grip while on water. When your board does not have it, you will find it challenging to maintain balance and do tricks.

Additionally, surf wax will also help you slice through the waves. With this, you can easily find your optimal balance with its stickiness and traction throughout your surfing experience. However, be sure that your wax complements the water temperature.

Here are the ideal wax types for certain water temperatures:

  • Cold: 60 degrees and below Fahrenheit
  • Cool: 58-68 degrees Fahrenheit
  • Warm: 64-74 degrees Fahrenheit
  • Tropical: 75 degrees and above Fahrenheit

Q: How can I remove the surfboard wax from my clothes?

A: You will need an iron and paper towel. A blotting paper or paper bags are also good alternatives.

Set your iron heat to low and put the paper towel under your shirt or shorts. Iron the spot where the stain is.

You can also soak it in an oxygen-based stain remover and leave it overnight. The next day, splash some water and wipe your board with some clean cloth to make sure every residue is removed.

Alternatively, you can put your cloth inside the freezer. It will help you harden the wax so you’ll have an easier job to peel it off. Afterward, check for any residue and put it in the washing machine to finish cleaning it.

 Related Resources